How do I hook up speakers from a reciever? - how to hook speakers to reciever
The Head of the Division have been connecting wire speakers, but the receiver has only plugs. How can this work?
How To Hook Speakers To Reciever How Do I Hook Up Speakers From A Reciever?
3 comments:
If the Red and Black buttons on the receiver at the back? They are known as 5-way binding.
A screw is one of the controls. It will open a hole in the side. Insert the speaker cable, a screw down and that's all.
WARNING: a sloppy work by wire can damage your computer. Cut the son of bare walls and a few brief and ensure that no strands of copper wire will lead to a short circuit.
You can put banana plugs on the end of the speaker cable, if you wish. Radio Shack sells bananas Nice screw into 2 halves, and you do not need any tools. It is strongly recommended. I have one of the following links for you.
Get a new receiver. Connector is for all systems in the above table generally. Convert speaker wire to connect is a pain in the A and the noise is likely to be poor. So do yourself a favor and drop one hundred U.S. dollars or less at Best Buy and buy a digital receiver.
It depends on the socket.
Is this a standard banana plug, you can easily terminate your speaker cable and standard plug in.
Is on the other hand, if it is a complement to the specialty encounter some difficulties.
Some seem to accept only plugs too. If there is a red circle (or black) plastic with a hole in a metal post in the middle, unscrew the plastic on the outside and can be used for standard speaker cable to get in touch with the road.
I must see it to tell you more.
Post a Comment